Detection of Back Cover Material Defects Based on Convolutional Neural Network and TensorFlow


Sasa Ani Arnomo(1*); Siti Fairuz Nurr Sadikan(2);

(1) Universitas Putera Batam
(2) Universiti Teknologi MARA
(*) Corresponding Author

  

Abstract


The application of deep learning using TensorFlow to improve the efficiency of material quality control is highly needed. In this case, the material quality inspection process in the form of a back cover is an important phase in the production chain. Damage resulting from industrial machinery reduces product quality. Some common problems occur when the back cover material is damaged, such as scratches, breaks, and cracks. This is caused by impacts or falls during the production process. It takes a long inspection time if done manually by workers one by one. The speed of material inspection is also an important priority for greater efficiency. An approach is proposed that applies deep learning using TensorFlow which focuses on convolutional neural networks (CNN) for image recognition and processing. It is used for image segmentation by detecting and separating objects. This method can classify the image quality of the back cover material. The main objective of this study is to produce a model that can detect material quality accurately. The highest level of accuracy was achieved at epoch 20 of 0.98. The success of this study is that it can reduce the involvement of inspectors. Thus, it can increase the efficiency of the defect detection process in the back cover material


Keywords


CNN; Back Cover Material; Deep learning; Defect; Quality Control.

  
  

Full Text:

PDF
  

Article Metrics

Abstract view: 8 times
PDF view: 2 times 		     

Digital Object Identifier

doi  https://doi.org/10.33096/ilkom.v17i1.2259.20-26 		  

Cite

How to cite item

References


S. I. Kalogiannidis, “The Effects of Total Quality Management Practices and Marketing on Performance of SMEs. A Case of Selected Manufacturing Industries, Greece,” Bus. Manag. Strateg., vol. 12, no. 1, p. 48, 2021.

R. Nicolas et al., “Assessing the fresh properties of printable cement-based materials: High potential tests for quality control,” Cem. Concr. Res., vol. 158, no. 2022, p. 106836, 2022.

I. M. Sarivan et al., “Enabling real-time quality inspection in smart manufacturing through wearable smart devices and deep learning,” Procedia Manuf., vol. 51, pp. 373–380, 2020.

J. Deuse, N. West, and M. Syberg, “Rediscovering Scientific Management - The Evolution from Industrial Engineering to Industrial Data Science,” Int. J. Prod. Manag. Eng., vol. 10, no. 1, pp. 1–12, 2022.

G. Dutta, R. Kumar, R. Sindhwani, and R. K. Singh, “Digitalization priorities of quality control processes for SMEs: a conceptual study in perspective of Industry 4.0 adoption,” J. Intell. Manuf., vol. 32, no. 6, pp. 1679–1698, 2021.

M. C. Magnanini, M. Colledani, and D. Caputo, “Reference architecture for the industrial implementation of zero-defect manufacturing strategies,” Procedia CIRP, vol. 93, no. March, pp. 646–651, 2020.

L. Allen, J. Atkinson, D. Jayasundara, J. Cordiner, and P. Z. Moghadam, “Data visualization for Industry 4.0: A stepping-stone toward a digital future, bridging the gap between academia and industry,” Patterns, vol. 2, no. 5, p. 100266, 2021.

A. Ghadge, M. Er Kara, H. Moradlou, and M. Goswami, “The impact of Industry 4.0 implementation on supply chains,” J. Manuf. Technol. Manag., vol. 31, no. 4, pp. 669–686, 2020.

N. N. Misra, Y. Dixit, A. Al-Mallahi, M. S. Bhullar, R. Upadhyay, and A. Martynenko, “IoT, Big Data, and Artificial Intelligence in Agriculture and Food Industry,” IEEE Internet Things J., vol. 9, no. 9, pp. 6305–6324, 2022.

M. R. Baqueta, A. Coqueiro, P. H. Março, and P. Valderrama, “Quality Control Parameters in the Roasted Coffee Industry: a Proposal by Using MicroNIR Spectroscopy and Multivariate Calibration,” Food Anal. Methods, vol. 13, no. 1, pp. 50–60, 2020.

N. A. R. Negri, G. M. R. Borille, and V. A. Falcão, “Acceptance of biometric technology in airport check-in,” J. Air Transp. Manag., vol. 81, no. August, p. 101720, 2019.

M. Bhargava and S. Gaur, “Process Improvement Using Six-Sigma (DMAIC Process) in Bearing Manufacturing Industry: A Case Study,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1017, no. 1, 2021.

G. Sariyer, S. K. Mangla, Y. Kazancoglu, C. Ocal Tasar, and S. Luthra, “Data analytics for quality management in Industry 4.0 from a MSME perspective,” Ann. Oper. Res., no. 0123456789, 2021.

Q. Zhang et al., “Deep learning based solder joint defect detection on industrial printed circuit board X-ray images,” Complex Intell. Syst., vol. 8, no. 2, pp. 1525–1537, 2022.

J. Božič, D. Tabernik, and D. Skočaj, “Mixed supervision for surface-defect detection: From weakly to fully supervised learning,” Comput. Ind., vol. 129, 2021.

E. Handoyo, Y. A. A. Soetrisno, E. W. Sinuraya, D. Denis, I. Santoso, and H. M. Irsyad, “Designing a Machine Learning Model Using Tensorflow in the Cato Application to Recognize Human Body Members,” J. Sains Teknol., vol. 5, no. 2, pp. 285–294, 2022.

S. A. Arnomo, Yulia, and Ukas, “Building The Prediction of Sales Evaluation on Exponential Smoothing using The OutSystems Platform,” Ilk. J. Ilm., vol. 15, no. 2, pp. 222–228, 2023.

R. S. Peres, X. Jia, J. Lee, K. Sun, A. W. Colombo, and J. Barata, “Industrial Artificial Intelligence in Industry 4.0 -Systematic Review, Challenges and Outlook,” IEEE Access, pp. 220121–220139, 2020.

D. B. Rathore, “Integration of Artificial Intelligence& It’s Practices in Apparel Industry,” Int. J. New Media Stud., vol. 10, no. 01, pp. 25–37, 2023.

C. Wu et al., “SEMG Measurement Position and Feature Optimization Strategy for Gesture Recognition Based on ANOVA and Neural Networks,” IEEE Access., vol. 8, pp. 56290–56299, 2020.

I. Kilic and G. Aydin, “Traffic Sign Detection and Recognition Using TensorFlow’ s Object Detection API with A New Benchmark Dataset,” 2020 Int. Conf. Electr. Eng. ICEE 2020, 2020.

A. R. Visalatchi, T. Navasri, P. Ranjanipriya, and R. Yogamathi, “Intelligent Vision with TensorFlow using Neural Network Algorithms,” Proc. 4th Int. Conf. Comput. Methodol. Commun. ICCMC 2020, no. Iccmc, pp. 944–948, 2020.

Y. Ju, X. Wang, and X. Chen, “Research on OMR recognition based on convolutional neural network tensorflow platform,” Proc. - 2019 11th Int. Conf. Meas. Technol. Mechatronics Autom. ICMTMA 2019, pp. 688–691, 2019.

T. J. Sheng et al., “An Internet of Things Based Smart Waste Management System Using LoRa and Tensorflow Deep Learning Model,” IEEE Access, vol. 8, pp. 148793–148811, 2020.

B. A. Alpatov, N. Y. Shubin, and A. V. Yakovlev, “TensorFlow for Generating Edge Detection Dataset,” 2020 9th Mediterr. Conf. Embed. Comput. MECO 2020, pp. 8–11, 2020.

V. Oujezsky, A. Tomasov, M. Holik, V. Skorpil, T. Horvath, and M. Jurcik, “GPON Traffic Analysis with TensorFlow,” 2020 43rd Int. Conf. Telecommun. Signal Process. TSP 2020, pp. 69–72, 2020.

D. Bajpai and L. He, “Custom Dataset Creation with Tensorflow Framework and Image Processing for Google T-Rex,” Proc. - 2020 12th Int. Conf. Comput. Intell. Commun. Networks, CICN 2020, pp. 45–48, 2020.

O. Kembuan, G. Caren Rorimpandey, and S. Milian Tompunu Tengker, “Convolutional Neural Network (CNN) for Image Classification of Indonesia Sign Language Using Tensorflow,” 2020 2nd Int. Conf. Cybern. Intell. Syst. ICORIS 2020, no. 26, 2020.

H. Y. Suen, K. E. Hung, and C. L. Lin, “TensorFlow-Based Automatic Personality Recognition Used in Asynchronous Video Interviews,” IEEE Access, vol. 7, no. c, pp. 61018–61023, 2019.

K. Wongsuphasawat et al., “Visualizing Dataflow Graphs of Deep Learning Models in TensorFlow,” IEEE Trans. Vis. Comput. Graph., vol. 24, no. 1, pp. 1–12, 2018.

Di. Someshwar, D. Bhanushali, V. Chaudhari, and S. Nadkarni, “Implementation of Virtual Assistant with Sign Language using Deep Learning and TensorFlow,” Proc. 2nd Int. Conf. Inven. Res. Comput. Appl. ICIRCA 2020, pp. 595–600, 2020.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Sasa Ani Arnomo, Siti Fairuz Nurr Sadikan

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.